Implement Connection of gNB to Core Network
Q1. Which protocol performs the first signaling exchange between the gNB and AMF during the NG Setup procedure?
Q2. Before sending the NG Setup Request, what must be established between the gNB and AMF?
Q3. Which field in the NG Setup Request identifies the tracking location of the gNB?
Q4. The NG Setup Response message contains which of the following to identify the core network’s identity and region?
Q5. What is the primary purpose of the N3 interface?
Q6. Which port does GTP-U use for transporting user plane packets?
Q7. The Tunnel Endpoint Identifier (TEID) is used to:
Q8. During PDU Session Resource Setup, the UL TEID is provided by:
Q9. Which message initiates the activation of the N3 interface?
Q10. The default paging DRX value in the NG Setup Request is used to define:
Q11. Which protocol stack is used for NGAP messages between gNB and AMF?
Q12. In uplink data flow, GTP-U packets from the gNB are encapsulated using which outer source and destination IP addresses?
Q13. What part of the PDU session setup message indicates the slice being used?
Q14. Which component in the 5G Core is primarily responsible for session management and TEID allocation?
Q15. In the SBA Simulator Dashboard, what is the correct sequence to start the 5G network functions?